Required to set it up manually, click Apply once you have set it up correctly (I will advice you to get a 3g router that supports DHCP) If your router supports DHCP turn it ON and click Apply.If your router do not support DHCP you will be Now check that your Network Settings are configured correctlyġ1. Now highlight each cline you wish to activate, by clicking the OK button, a tick box will appear next to each cline you have activated.ġ0. Once the tick is displayed, click the Yellow(Read ) button.Now select CCcam Plug Setting and click the OK button. save the changes.Ģ, add the cccam.cfg file to a USB Stick, do not zip the file, add it as isģ, goto Menu -> Network Local Settings and select CCcam Plug Setting and click the OK buttonĥ, select CCcam,cfg and (this CCcam.cfg will be provided when you buy your cccam Account/ server) click the OK button, you should then see a check mark or tick appear, indicating you have selected the file, if there is no tick shown, then you have not selected anything,and nothing will be installed go over it and double check okayĦ, if there is no tick displayed, select CCcam.cfg and click OKħ. Now How to set cccam account into openbox s10:ġ, download “cccam.cfg” file, overwrite the test account into it. Iv Then set your CCCAM ACCOUNT into your decoder use 3g router ,transfer internet to lan port internet ,connect LAN INTERNET PORT with decoder

connect your satellite LNB with your decoder Check DHCP and ENJOY Your Favorite Channels.Īs for openbox syou need to complete the followings so that you can use it with cccam Then Plug the DSL internet line into Dreambox and go to Menu>setup>expert Setup>comunication Open var folder then etc and replace or paste your CCam.cfg file. Default Username: root Password: dreambox , uncheck DHCP and put IP 192.168.0.2 and same subnetmask. After Connecting Your Dreambox to Your Computer, Open Lan Card Properties > TCP/IP Protocol Properties > Put IP 192.168.0.1 and subnet mask as 255.255.255.0 and then Close the tabs. Connect Your Dreambox to Your Computer Using a Cross-over Network Cable having Rj-45 Plugs both sides. Replace The CCcam.cfg which was sent to you in VAR/ETC. After That Go to auto Cam and Change Default Cam to CCcam 2.0.11 or latest Which you installed. Then Enable AUTO CAM, From blue the Panel. Go to addons > Cam and Select CCcam 2.0.11 Complete or latest For Download and then install it.

Setting Up a CCcam Account on Dreambox Receiver:ĭreambox and go to blue panel by pressing blue button on remote.

Cccam config